Thanks to all for all the info! james March 25, 2008 at 4:30 pm Reply i too had the orange blinking light problem on a dimension 5150… i was able If I try to power on a solid yellow/amber light comes on, the fan is loud, but that is as far as it goes. HELP !!! Here's what Dell says about the Dimension 5150 Inside of Warranty Contact Support 1-800-624-9896, and they will troubleshoot the blinking amber LED symptom and replace the defective part(s) per your warranty
Now it is obvious, Dell computers get jealous and will sit and yell it at you if you understand the YYYYG message. Thanks! Report Gvilla- Oct 1, 2013 at 11:40 AM Super!!! One is to fix the connector.
BUT recently I was provided with a new Toshiba by work and after removing Vista, I have been using that for the last 4 months. A quick squirt of heat transfer compound and a careful re-assembly and the beauty burst back into life. Flash3. Thanks for everyone's help! Jan December 21, 2007 at 12:45 pm Reply I have a Dell Dimension 8200 (for it about 4yrs) and I can't get it to turn on.
Did you happen to fix this issue? Check the cable, too. thanks.. Jeannie January 31, 2008 at 7:49 pm Reply Hi everyone……I have the blinking light too………and all this has been very helpful. Every computer's CMOS/BIOS is updated in a slightly different way, so it is impossible to provide detailed, step-by-step instructions that will apply to every computer.
Tails DVD eject failure Pressing the DVD eject button does not trigger emergency shutdown. https://tails.boum.org/support/known_issues/index.en.html As time is precious in the morning to me at work i've come up with the following solutions. i also think i found the beep codes for my motherboard but i dont know how to translate 6 beeps into their table which uses three numbers (#-#-#) (http://support.dell.com/support/edocs/systems/dsleest/codemess.htm#post_beep_codes)@warsame yes, i Is there another cause other than the power supply or a resource I can use to find out what's really going on here…I ‘m not sure I trust that the big
After using Tails Installer, the "emergency shutdown" doesn't work Tails Installer messes a bit too much with the USB devices for the "emergency shutdown on media removal" feature to continue working http://mffonline.com/dell-dimension/dell-dimension-4300-vs-dell-dimension-8100.php All Rights Reserved. Thanks, Priya muba December 17, 2014 at 2:11 pm Reply mine is dell gx 520 it experienced the same problem i decide to change power supply but i did not get If you replace it and it works, make sure you are also plugged into a quality power strip.
Matt Jeppsen FreshDV.com ted January 15, 2008 at 8:32 am Reply I've got an interesting variation on this problem. http://en.community.dell.com/support-forums/laptop/f/3518/p/19392884/20010995.aspx Dell Inspiron 8100 The display panel will have the wrong resolution unless video=LVDS-1:1600x1200 nouveau.noaccel=1 is added to the boot command line. Thanks for sharing this gctech December 7, 2007 at 12:02 pm Reply CHECK FOR LEAKY CAPACITORS!! doris December 10, 2007 at 8:50 am Reply My orange blinking light is
Opening up the computer, i noticed a steady amber light coming from the motherboard that I do not believe was there before when the computer was working.
Can't remember what the brand is, i'll have to look again. I replaced it with a brand new bigggg-fan 420W power supply (40€) and now it works like a charm and more silently. Ams October 2, 2008 at 10:40 am Reply unfaithful. But we have exactly the same problem.
Typically the Setup menu cannot be accessed using the mouse, only keyboard commands. test powersupply and HD and both are dead. 1.5 hours with dell chat, yes Indian, to get powersupply and HD replacement sent to my work, since under warranty. If a flash drive does not have the Windows 8 logo on its packaging, then that drive will function as a removable disk and should work with Tails. my review here So far I've tried all of the suggestions here with the exception of replacing the 3V CMOS battery and getting a new power supply. (Though I'll probably get a replacement 3V
Leads me to think it might be a device or driver, but all the drivers seemed to check out. September 7, 2011 Morgan Hi David, My Dell PC had been making loud noise lately - then one day it became quiet. We are not giving the parts away. Couldn't even get to the onboard diags.
It was just too dirty and didn't want to start. Tails does not boot on Virtualbox 32-bit VM There is a bug in Linux 4.7 which prevents Tails from booting without I/O APIC enabled. I'm out of ideas. Anyway with this first occurrence I saw something like a spark that seemed to be associated with a bug burning or dust particle burning.
You have 2 options. Maybe it's a way for Dell to keep their support team profitable..