Home > Hard Drive > CD-RW Configuration - From Slave To Single Configuration?

CD-RW Configuration - From Slave To Single Configuration?


Anything from the last couple of years it won't matter how you hook them up. Additional enclosures that hold up to 8 more recorders can be added to the system at $2000 each, up to maximum of 16 recorders per controller. Why would you do that?I've isntalled plenty of drives where the master setting was the sameas a drive that was a "single" drive, ie no other drive was on thatchanne. Often, retail optical drive products will include such a cable. this content

And guess what? Join the community here. It booted. Automation in the form of a robot loader can streamline this process and allow unattended recording, but the recording time doesn't change. http://www.techspot.com/community/topics/cd-rw-configuration-from-slave-to-single-configuration.99316/

Sata Hard Drive Pinout

Each application should be evaluated on its own merits, and an appropriate solution chosen based on the full range of criteria, not simply on price. solved Dolby Atmos Configuration for <$2,000 solved ADSL2+ performance configuration solved Intel RST, RAID 1, configuration question on mixing HDD's solved ASRock Z97 Extreme6 M.2 SSD not shown in "Storage Configuration" The most common 4-drive scenario is: hard drive 1 hard drive 2 CD-ROM drive CD-(Re)Writer drive The first hard disk drive should always be configured as the primary master.

For most of ATA's history, ribbon cables had 40 wires, but an 80-wire version appeared with the introduction of the Ultra DMA/66 standard. Box 7427 Charlottesville, VA 22906 USA 804-985-4300 fax: 804-985-4625 Philips Key Modules 2099 Gateway Place Suite 100 San Jose, CA 95110 USA 408-453-7373 fax: 408-453-6444 http://www-eu.philips.com/pkm/laseroptics/cdr/ Plextor 4255 Burton Drive Santa I've installed hundreds, repeat, hundreds! Hard Drive Pinouts They contain >modern CDRW drives, but they do all sorts of odd things, such as:>># Not recognising anything has been put into the drive until it is SINGLE >clicked in Explorer

Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? Ide Pinout 44 Hoei Sangyo Available from MicroBoards Japan or MediaFORM in North and South America as a four CD-R drive master-slave configuration, this system is priced at SRP $14,900 for the master, $14,500 JVC The JVC ROM-Maker Multidrive system operates on a master/slave principle. The bottom line is that there's no one single configuration that is optimal for everyone.

The difference between a job scheduled for a 2-week turn versus an identical one on a 2-day turn can be four or five times as much or even more for the Ide 40 Pin Vs 44 Pin The faster UDMA5 and UDMA6 standards require 80-conductor cables. of >>different model hard drives over the years from virtually every manufacturer >>of hard drives and I have NEVER encountered even a single instance where a >>hard drive that was connected/configured In the absence of a key, the rule is that the red (or blue) line always goes next to pin 1.

Ide Pinout 44

Pin Name Dir Description 1 /RESET Reset 2 GND Ground 3 DD7 Data 7 4 DD8 Data 8 5 DD6 Data 6 6 DD9 Data 9 7 DD5 Data 5 8 http://pinouts.ru/HD/AtaInternal_pinout.shtml Each controller holds up to four Yamaha 4x recorders, and up to four 4-drive controllers can be daisy-chained up to a maximum of 16 recorders. Sata Hard Drive Pinout This reduces the effects of electromagnetic induction between neighboring wires and enables the 66 megabyte per second (MB/s) transfer rate of UDMA4. Ide Hard Drive Pinout Of course the second IDE/ATAPI device was connected as Master on the Secondary IDE channel.

I> would hazard a guess that it isn't a good idea, and I certainly wouldn't > do> it myself, but if anybody else has further info on this BEFORE I speak news If only one drive is used, jumper it as Single (if such a mode exists, or most common Master else). The Perfect Image printer by itself lists for $7,750, and the required driver software, CD Engine, lists at $750. IO ChipSelect 16 33 DA1 Address 1 34 PDIAG ? 40 Pin Ide Pinout

Some IDE cable are too short to accomodate this in mini or full tower cases."Jon_Hildrum" wrote:> My recommendation is to install both harddrives on EIDE 1 with the CDRW as> primary It's conceivable that you may have somespecial function(s) that favor this or that configuration.Anna annaFeb 21, 2005, 9:29 PM Archived from groups: microsoft.public.windowsxp.hardware (More info?)> On Sun, 20 Feb 2005 11:30:31 Main Sections Technology News Reviews Features Product Finder Downloads Drivers Community TechSpot Forums Today's Posts Ask a Question News & Comments Useful Resources Best of the Best Must Reads Trending Now have a peek at these guys There are so many factors that play a role, a pure one-to-one comparison is impossible except in very well-defined hypothetical situations.

In fact, we're using rounded IDE cables here. Ide Connector Pinout It's relatively simple to connect your IDE/ATAPI devices in various configurations and perform speed tests to determine if there's any appreciable differences resulting from one configuration over another. Webmaster permission required in any other cases.Efforts have been made to ensure this page is correct, but it is the responsibility of the user to verify the data is correct for

Duplication Benefits Time Using multiple recorders controlled by a single computer offers time savings over both single recording and replication.

They contain> modern CDRW drives, but they do all sorts of odd things, such as:>> # Not recognising anything has been put into the drive until it is SINGLE> clicked in Would this explain my> problems?It's possible. Power connector: Connect a large 4-pin white connector from the power supply to the drive's male 4-pin power connector. Ide Power Connector Pinout Would this explain my >problems?

On reboot it hangs at "configuring system..." <- note 3 dots Slipstreaming complete Xp Sp3 from Pata To sata Hdd {keeping the sata Configuration intact} solved If I do the raid Mac and Windows 2x slave units are $4095 with the first CD-R, and $995 for each additional recorder up to five. Data can be written to cache [or temp] file on C Drive before being written to the burner on IDE1. http://mffonline.com/hard-drive/cannot-see-my-slave-drive.php or other kinds of media as well as CD-R.

if we were connecting a WD HD that was designed with a Single jumper setting and we were installing that HD as a single device as Master with no other IDE/ATAPI They are waiting for 4x caddy-less drive such as TEAC (mid-July) before delivering 4x systems, but it is available now with Philips 2x recorders. solved Does the Asus - P5G41T-M LX Actually Support DDR3 1333? This key should fit into a slot in the middle of each connector of the motherboard and internal IDE peripherals.

Opening the case confirms this, and it looks like the Sec Slave connector (2nd connector on the cable) has been used for easier cable routing. They'll all be correct. I >would hazard a guess that it isn't a good idea, and I certainly wouldn't do >it myself, but if anybody else has further info on this BEFORE I speak to