Linux SCSI naming convention: /dev/sda, /dev/sdb, ... It's also a good idea to touch the power supply before you go sticking your hands in there! Note: If you are formatting using the FAT32 file system, partitions cannot be larger than 32 GB. Partitioning/Formatting: Once the above step is complete, right-click in the unallocated space of the drive. why not try these out
How To Set Master Slave Sata Hard Drives
IDE CD-ROM Device So I don't see a way to tell it to boot from the 'Primary Slave Drive'. The master can also be referred to as the "primary" drive with the slave being the "secondary". The digit "1" identifies the root ("/") of the filesystem. Do I need to edit menu.lst? –Alfred Zhong Aug 7 '12 at 1:54 That sounds like what I would do.
The time now is 10:16 PM. Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... After the drive is secured then go ahead and connect the power and IDE cables. How To Install A Second Sata Hard Drive In Windows 7 Note that the default choice is to "Remove Linux partitions on selected drives and create default layout." This is fine if you have a previous installation of Linux and want to
Click on Create Partition. Master Slave Hard Drive Setup Re: Installation on a 2nd drive alongside XP You don't appear to have any unallocated space on either disk, and the second partition on sdb is still ntfs. This may still occur even if you are installing a single drive. their explanation If this situation occurs, set the drive to User and enter 1023 for Cylinders, 16 for Heads, 63 for Sectors, and disable LBA mode.
What I found - when installing a 3rd OS on 2nd HD / 2nd Partition - is that GRUB always uses the menu.lst on the last Linux partition you installed. Difference Between Master And Slave Drive A boot directory on the drive is always made, which houses the vmlinux, initrd, config file, grub reference files and system.map file. Click Next to continue. You must use this wizard to write a Signature to the drive.
Master Slave Hard Drive Setup
Boot Repair -Also handles LVM, GPT, separate /boot and UEFI dual boot.: https://help.ubuntu.com/community/Boot-Repair You can repair many boot issues with this or 'Create BootInfo' report (Other Options) & post the link Installing Linux on a Second Hard Drive (two drives on the system): If you want to install Linux on a second hard drive in your system, the process can be a How To Set Master Slave Sata Hard Drives Hi, After the attempt to install with an unallocated area on sdb failed with the same symptons as before, I reasoned that the unallocated space thing was a red herring and Master Slave Hard Drive Jumper Settings select manual install (something else option).
At startup, run the CMOS Setup program and configure your BIOS so your drive is detected. Operating System: Boot files: sdb2: __________________________________________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. But then you also have to have to correct 80 conductor cable & jumpers on drives. have a peek at these guys The next screen shows the drive you have selected to write the signature to (if this is a new drive install only a signature will be written, making the drive a
Hi, As I said in the starter, at one point I deleted the second partition on the second drive leaving an unallocated space of about 90 Gb. Sata Master Slave A drive can only transfer as fast as the slowest device on the channel. If using FAT32, donâ€™t create anything larger than 32GB.
Assign the drive letter.
Hope that helps to someone would like to do similar stuff. Click next and soon the new drive is available. Generally it's the [del] button that gets you into the BIOS but sometimes it's F1 or F2. How To Install A Second Hard Drive Windows 10 Is system so old that you still jumper IDE hard drives as master/slave and can only boot from sda?
Make sure that your system BIOS is properly configured. Drive is Slave - Use this setting if the drive is an additional drive on the cable and the original drive is set as Master. A sticker on the top of the drive will often show a diagram of jumper placement for drive assignment. check my blog Setting the Jumpers Master or Single Drive - Use this setting if the drive is the only drive on the ATA interface cable.
Same thing with Fedora's grub is looking for the start-up files on the wrong drive. This is supposed to happen, don't worry. I don't think SATA drives have master/slave configuration but I can't access the IDE master drive when I boot from the SATA drive. Once the installation is complete and you have installed Service Pack 2, enable UDMA again.
Moving the cable connector will swap hda and hdb notations. My hard drive is slow: Make sure you have your CD/DVD drives plugged into a different channel/cable. falko, May 1, 2010 #2 matt_thumper New Member resolved changed 'root (hd0,0)' in grub.conf to 'root (hd1,0)' matt_thumper, May 6, 2010 #3 Loisal New Member Ok. Jun 19, 2007 Master/slave drive not recognized Dec 23, 2006 Master to slave - Please help Aug 26, 2006 master to slave virus transfer????
In effect I was back to only master/slave even though system was new enough for cable select. If you want a single partition (single drive letter), select all the available disk space. Continue steps 4 and 5 until the desired amount of partitions is obtained and then click on Next to continue installing Windows Vista on the first partition. Not sure if your BIOS would let you boot from slave or not.