Home > How To > Changing Hard Drives From IDE To SATA With A RAID Configuration In Windows 7

Changing Hard Drives From IDE To SATA With A RAID Configuration In Windows 7

Contents

You can guess the result.-> Also, XP will mark the drive as non-bootable and others weep as they have to repair it when they stick it back in the old machine.Bob My only issue is: will the IDE be able to send the data to the SATA? Flag Permalink This was helpful (0) Collapse - Lost half my SATA drive by PennT / July 26, 2005 6:08 PM PDT In reply to: Mixing SATA and IDE drives in I have a sata HD running as my main drive and another IDE HD, formerly my main one, that I use for music files and backup storage. this content

Mike AFTER MANY HOURS OF RESEARCHING THIS..... When I boot up the computer it says AHCI BIOS NOT INSTALLED and then hangs and asks me to either press F1 to continue or F2 for setup. snejsnejJul 9, 2015, 5:25 AM Hi there,I have built a new system (specs below) with the intention of installing Windows 7 & applications on 1 HD, and using a 4 other What advantages did Catholic missionaries to the Indians have over Protestant missionaries in old Oregon Country? http://www.techspot.com/community/topics/changing-hard-drives-from-ide-to-sata-with-a-raid-configuration.150347/

Change Ide To Ahci Windows 10

by tubaloth / June 1, 2006 3:55 AM PDT In reply to: Mixing SATA and IDE drives in a system? lali xw 8600 not work Windows xp Masood Thanks worked. Shut down the system (power off).40. Restart your computer Go to UEFI/BIOS and enable AHCI, Save & Reboot Another restart may be required to finish the driver installation.

AHCI-User The Microsoft support says: Locate and then click one of the following registry subkeys: HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Msahci HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\IastorV support.microsoft.com/kb/922976/en-us Marco Davids Yesss! Changing the registry keys worked like a charm. For whatever reason, this was not sufficient to cause the proper drivers to be loaded. How To Change Ahci To Ide In Bios Hp Laptop Power on the system, go into the system BIOS.

AnonymousJul 11, 2010, 9:12 PM ► DELETED negrodamosOct 1, 2010, 11:15 AM thanks trajan for the update on how to do it in windows 7!! How To Change Sata Mode In Bios Flag Permalink This was helpful (1) Collapse - I've had this config. Searched entire registry for "SCSI Miniport", changing any Startup key to 0 (all were already set to 0, except for vhdmp (or something similar)), no joy. http://www.askvg.com/how-to-change-sata-hard-disk-mode-from-ide-to-ahci-raid-in-bios-after-installing-windows/ I'll be having a SATA later on for my slave drive.

Join the community here. Change Ide To Ahci Windows 7 Polearm Master Paladin casting spells with a polearm in hand Why is there a disclaimer about not accepting money from tobacco companies at the end of movies? Download Opera Neon Standalone Offline Installer [Tip] Control Data Collection in Windows 10 Using Microsoft Privacy Dashboard Download Windows 10 Insider Preview Build 15002 Offline ISO Files Download New "Opera Neon" This fixed it though, thanks!

How To Change Sata Mode In Bios

Shut down the system (power off).27. click I'm in progress of updating my Win7 to Win10, but I want a dual boot 7/10 arrangement. Change Ide To Ahci Windows 10 This launches Windows Device Manager and is the TRICK to this method. 10) You now can load drivers for the RAID as necessary. How To Change Ahci To Ide In Bios Jumper settings did nothing.

ANY help on why I can not change from raid to ahci? news Turn on the computer. Double click it to make sure Windows says that the device is working properly.26. Power on the system, go into the system BIOS. How To Enable Ahci In Bios

I have a computer here with Windows 7. If you are using a RAID adapter or other interface try the following: Open up Registry Editor and naviage to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStorV OR HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\iaStor. When I try to boot from USB/CD-DVD I get the screen you have shown above. http://mffonline.com/how-to/changing-dell-desktops-to-removable-drives.php Find Solutions, ask questions, and share advice with other HP product owners.

After sometime you realized it and changed the SATA mode from IDE to AHCI or RAID in BIOS and BOOM!!! Ahci Vs Ide Do the same for the other two Nvidia Controllers in Device Manager and restart your system. Thanks again!

As soon as Windows will start booting, it'll automatically detect the change and will install the appropriate drivers.

BIOS version 7 or greater Turn off the computer and wait five seconds. Soare Andrei At 99 percent market share as of 2013, Serial ATA is the most common PC disk interface, according to the Serial ATA International Organization. The posting of advertisements, profanity, or personal attacks is prohibited. Ahci Mode Windows 7 I have an Dell Optiplex 755 running Windows XP Professional.

First DO NOT change SATA hard disk mode settings in BIOS, leave it to the default settings which were used while installing Windows. 2. Since the target PC is set to ATA, there should be no trouble booting up. medjohnson77Jan 23, 2008, 1:45 PM Thanks for the info, I am about to set up a raid 0+1 on my new build, should of done it from the start but money check my blog Z7_3054ICK0KGTE30AQO5O3KA3015 hp-online-communities-portlet Actions ${title} Loading...

Just one question: if it was necessary to set "start" to 0 to get windows to take a fresh look at which driver to use (they were all at 3), shouldn't This article says within it that installing a mass storage controller driver before moving the Windows installation will work. I have been running a SATA drive as my primary drive with OS and programs and 2 IDE drives for data storage. My boot drive is utilizing RAID.Thx!

FB Nice one VG, your instructions worked a treat. At one of the prompts, I selected "Load Third Party Drivers" and then used the flash drive to add them in. We're pushing VM's and iSCSI now for that exact reason of down time complexity. Paul Thanks for this walk through, it worked like a charm, saved me a lot of time.

Thanks. PCI Express slots are currently for video cards.Bob Flag Permalink This was helpful (0) Collapse - Mixing SATA and IDE drives by Sheridan / July 22, 2005 1:02 AM PDT In Now enter into BIOS settings and change SATA hard disk mode to AHCI or RAID according to your requirements. 7. I initially used a BIOS Sata setting of AHCI to optimize the performance of my new 1TB hard disk (replacing a pair of 320GB disks).

Do you know that language? After loading a flash drive, I burned a Windows 7 rescue disk. Ok, I guess I might be tempted to squeeze down 4 gigs of data on my USB thumb drive to a 2.88 meg floppy disc...., NOT!Ahh nostalgia. Flag Permalink This was helpful (1) Collapse - New computers often handle this well by jrfree / July 22, 2005 6:42 AM PDT In reply to: Mixing SATA and IDE drives

Yes, my password is: Forgot your password? danmarhkNov 11, 2007, 1:41 AM Is it possible to migrate the system from one computer to another one as well?It happens when I buy a new system that Windows requires me Name your favourite charity and I'll send them a "thank-you". At some point you may need to change the boot order.

So, as far as my system is concerned, it now has 1 HD (IDE) running a clean install of Windows 7.Now however, I'd like to plug in those 4 other HDs Since the old connection to the ICH7R was SATA, and the Promise card also supports a single SATA drive, we don't need another hard drive, nor do we need to copy lizardking71 said: ↑ I take it you are not real happy with RAID confuguration.