Home > Windows Xp > Desktop XP Cant Access Workgroups Over Laptops Pc's (XP And Vista)

Desktop XP Cant Access Workgroups Over Laptops Pc's (XP And Vista)


Keep up the good work. I had this problem after trying to configure my laptop on another network so I was convinced it was something I had done to the setup but it was the setup Anyway, I have had three computers networked together for several years. When I go back, it is off again. navigate to this website

I can ping both of these computers from the Dual Core, but I cannot ping the Dual Core from either of the other two computers. If you think you know all the answers perhaps you should take a look at the number of posters who, despite their experience, still find this an almost impossible task! above too, anytime you change the Workgroup name you must re-boot that computer for the changed Workgroup name to apply. Thank A lot!

Workgroup Computers Not Showing In Windows Xp

When I try to print it allows me to choose the printer then tells me I cannot print?I have searched all over this site and can find NO information from MVP's Permissions, LLTP, Home or Work workgroup made no difference, it was that final layer buried in McAfee that was the stumbling block to home networking. I have a small office network, win2000pro desktop, win98 desktop, xp laptop.

Report Mark on the Pacific- Apr 18, 2014 11:51AM Maxcat - the REGEDIT32 fix WORKS GREAT! I have been searching for this solution for TWO DAYS STRAIGHT. You can read my previous post on how to setup DNS on Windows Server 2003 and how to troubleshoot problems with DNS. Windows Xp Network Discovery The 2 wire router sees all the systems.

Rgds, Iad Report Linda- Apr 4, 2010 07:13PM Your a genius! Workgroup Is Not Accessible Windows Xp When I finally turned Norton Firewall off altogether, I still could not discover the other computers, but I could at least use \\ ivia "Tools" in the "Network and Sharing Related Resources solved Access Denied even I am the Administrator and also Failed to change Ownership ( I am the Only Administrator ) solved Error 5: Access Denied; Can't uninstall/install software To change it open Regedit and find the navaget to the following: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\NetBt\Parameters Look at the DhcpNodeType key.

Still I have the same permission issue. Network Windows 7 And Xp Computers Together All setting are same as before outage using cat 5 with a switch, I tried new switch same problem. I followed your tutorial but I still cannot see the other PC. I've had a mixed Windows 7 + XP network running perfectly for months, then suddenly on Friday the whole thing falls apart.

Workgroup Is Not Accessible Windows Xp

If that doesn't work, let's see this. http://www.digitalcitizen.life/sharing-between-windows-xp-and-windows-7-computers I shared one partition and suddenly the server could see it and succeeded with the remote installs. Workgroup Computers Not Showing In Windows Xp Proposed as answer by dooge54 Tuesday, October 30, 2012 6:32 AM Thursday, August 19, 2010 10:40 PM Reply | Quote 0 Sign in to vote The answer to this is Can't See Other Computers On Network Windows Xp Can get them to see each other, much less sharge September 22, 2010 piper No help at all October 1, 2010 bob carl has the closest problem to mine.

Nov 20, 2007 #4 Haydnc TS Rookie Yes I did. Reboot the machine and you should be good to go. Today I am not able to ping each computer, but I can see them in work group and access…I tried manually by using the IP address..Please help me to solve this If you change the Workgroup name, you will need to re-boot the PC for the new Workgroup name to take effect. 2. How To Share Files Between Windows 7 And Xp

Without going online, set up your home network and make sure they both have the same workgroup name. Enter Your Email Here to Get Access for Free:

Go check your email! When I check to seecomputers on the mshome workgroup they all show, but when I click the onecomputer (which is the one that does not share) from any of the threecomputers If password protected sharing is enabled on the computer you are trying to access, you will be asked to enter a valid user name and password.

To learn how to change network sharing settings in Windows 7, check out our guide called How to Customize Network Sharing Settings in Windows 7. How To Connect Windows Xp To Windows 7 Via Lan windows firewall off. I cant connect to the internet when i am connected to both networks, i have to remove the wired one.

Follow this link and perform the registry change on the XP machine.

Microsoft MVP - Windows Desktop Experience 12-26-2007, 01:49 PM #3 fireguy60 Registered Member Join Date: Dec 2007 Posts: 3 OS: xp Here you go, thanks for the help. Join the community here, it only takes a minute. Thanks. Connect Xp To Windows 7 Homegroup Using "Home" network with common network name on all computers.

Vista had no problem, but the XP machine would not allow the network through until weshut off the firewalls on both. Could one of these have caused this issue? If you can’t ping them, then that means that there is something wrong with the network connection itself. Helpful +1 Report nyi nyi Oct 13, 2009 08:40PM friends you might want to check out these pages to fix such problems that help http://helpdeskgeek.com/...

Close Registry Editor. But I cannot access the folder, which the message says is not shared. zaahied says: 6 years ago Hi. The fix was not an easy one.

but the solution here to change the registry setting does work!! Essentially you’ll want to make sure both machines are part of the same workgroup, set up the correct sharing settings, and making sure network discovery is enabled on Windows 7. Reboot the system for the change to take effect. In my case, once Windows 7 was installed I never could access my xp shared drives (c$, d$).

I was off duty for two years and never suspected this might happen again. All files (on the computer that will not share) are set to allowsharing on the network. Most of my systems are now Ubuntu Linux, but I have one XP system for "legacy" software (mainly PC games for the kids) and one Vista system for current compatibility (everything but that is one of the mysteries of Windows.

TT says: 7 years ago The obtain IP address automatically section worked for me I just deleted the numbers that I had in the ip addresses and it worked for me Report ArtTekGal- Jan 10, 2010 02:23AM It's nearly a year since this was posted, but this reply solved my problem!!!! Join thousands of tech enthusiasts and participate. I have re-installed Windows XP Pro five times of the past week without seeing any changes.

From there, I put a check box in the names of the XP users I wanted to allow access, and clicked finish. two printers on win2000 machine, linksys router. Yop Proposed as answer by TLindsay42 Sunday, October 31, 2010 9:10 PM Friday, July 16, 2010 10:27 PM Reply | Quote 0 Sign in to vote disable your firewall on win7 Although it might sound complicated, the process is not bad.

Allow File and Printer Sharing in Windows/3rd party Firewall Once you have enabled File and Printer Sharing, you still may not be able to see other computers on the network if Is one a 'main' computer and the other wireless? I am trying now to network a vista and xp pro sp3 by wired router.