Home > Won 39 T Boot > Bought Kingston Tech. 256mb RAM. Now COMP Wont Boot.

Bought Kingston Tech. 256mb RAM. Now COMP Wont Boot.


Open up your PC and re-seat the stick properly.2. Most computers these days are either Pentium 4 or AMD Athol.These also run memory slightly differently due to the FSB speeds and if the system is 32 or the new 64.Also there is a 256mb PC133 module that is supposed to have 16 chips according to it's data sheet that they don't make with 16 chips anymore, though they haven't changed the Why is 7 the most feared number? navigate here

You mentioned that the system came with 1GB already installed but you didn't specify if that was a single 1GB stick, or 2 sticks of 512MB. Bishop- Apr 17, 2009 at 03:06 PM did you remove the power cord before holding the button and wat kinda pc is it dell hp compaq which one Helpful +0 Report What are my options? Check the socket where the RAM is installed. http://www.techspot.com/community/topics/comp-wont-boot-with-new-ram-please-help.46204/

Computer Won't Boot After Installing New Ram

Had to go to work early enough, and that makes me double uneasy, being unable to do anything about it now. The computer can except PC2-5300, 6400 or 8500 memory and is capable of running in Dual Channel mode. These days it's a lot simpler and since your PC is relatively new, I'm surprised you're having trouble.So here are my thoughts. Melde dich an, um unangemessene Inhalte zu melden.

I built my pc last year and it crashed on me just a couple of months ago. Upon starting it says Select the proper boot device or insert a bootable cd and restart (cant remember the exact phrase). Kategorie Wissenschaft & Technik Lizenz Standard-YouTube-Lizenz Mehr anzeigen Weniger anzeigen Wird geladen... Windows Won't Boot After Ram Upgrade if you do...their scan will not give you the answers you want...but they do have a on line help person who will led you thru it if needed Flag Permalink This

with online vendors you are as close as a couple of faxes, three or four emails and two phone calls. Initially, I was concerned about applying too much pressure & damaging the stick but found out that it does take a bit of pressure to get the memory seated properly. Transkript Das interaktive Transkript konnte nicht geladen werden. By mixing memory kits together, there may be compatibility issues such as unable to boot or unable to operate at rated specifications.

So then I removed the RAM, booted, turned it off, replaced the RAM, booted and it was all working fine. Laptop Won't Boot After Ram Upgrade Submitted by: Frank L.***********************************************************************Answer:Reader Jack K. Bitte versuche es sp├Ąter erneut. I have used the board myself. –tumchaaditya Jun 19 '12 at 4:41 I was just saying you make it sound like you don't think that any board can do

Upgraded Ram Computer Won't Boot

They're MOST appreciated !Novice K Flag Permalink This was helpful (0) Collapse - This Crashed My System- - - Still Broken by leaglebob / July 28, 2006 4:20 AM PDT In Then I usually give the memory stick another SMALL wiggle to make sure all contacts are touching properly and everything is in contact. Computer Won't Boot After Installing New Ram The system has 4 memory slots, 2 are occupied by 512MB stick of memory for a total of 1GB. Windows 10 Won't Boot After Ram Upgrade Hope this helps.Submitted by: Scott J.***********************************************************************Answer:Your memory card/stick may not be recognized by the system for any of a number of reasons:1.

Reply to ysbeer ysbeerDec 26, 2013, 2:29 PM I see the voltage is at a standard of 1.5 to what should I raise the RAM voltage for this RAM? http://mffonline.com/won-39-t-boot/computer-wont-boot-at-all.php I wanted to upgrade it to 2 or 3 gig's of ram so I searched and read a lot about the different types of ram so I settled on a well You may also want to check the manufacturer of memory to see if it compatible with your processor. Again, you may still have purchased the proper format (SDRAM, DDR, DDR2, etc) but you may have not purchased the proper registration requirement.Last, you do not specify if the 1 GB Added More Ram Computer Won't Boot

Do a search on the p/n of your addon RAM and verify that the specs are the same as the original RAM (search its p/n also). Assuming it worked, add in the new memory to Channel 1 slot 0. Reply to jjs0891 ysbeerDec 24, 2013, 3:06 PM Hi, I tried the BIOS update with a bootable usb memory stick but it did not help unfortunately. his comment is here Helpful +0 Report ezinezout Jul 12, 2009 at 10:10 PM I had same problem.

Take out all the memory sticks. Installed New Ram Windows Won't Start I am 100% certain that the motherboard is ASUS M4A78LT-M-LE (sudo lshw), and both sticks are DDR3. Blue Screen came on while I was gaming.

You'll find discussions about fixing problems with computer hardware, computer software, Windows, viruses, security, as well as networks and the Internet.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion 7/28/06 Computer doesn't recognize the

Thank you all for your time in helping me with this problem. If you have two slots then swap one to another and try rebooting.Solution 3Either the slot or the RAM could be faulty. Crucial has a new look sense I last visited them!! Installed New Ram No Display Report • #21 OtheHill April 18, 2009 at 12:09:31 Your motherboard supports 1066MHz & 800MHz FSB.

Aug 14, 2007 my comp. My Acer screen said no signal and Windows wouldn't even boot up. As Rich says they guarantee a match! http://mffonline.com/won-39-t-boot/comp-will-not-boot.php Need help.

I reinstalled my windows and it now it recognizes both of my RAM modules.Submitted by: Ayan***********************************************************************Answer:This could well have an easy fix. Crucial Home Page | United States (USD) 04-19-2015, 11:09 AM #10 Bill_Bright Microsoft MVPWindows IT ProMicrosoft Support Visiting Tech Join Date: Dec 2004 Location: Nebraska, USA Posts: Thanks and hope you don't experience this. Help please.

An additional note of caution when purchasing RAM make sure that the integrity of the packaging is not breached. Everything spinning but only thing that I can see is the CD rom light flashing. If none of these is the problem you may have a bad memory socket or a motherboard problem.Submitted by: Howard V.